- GPU fans forcing air into other fans can cause cooling issues due to turbulent airflow, particularly if the GPU fans conflict with PC case intake fans.
- The direction of GPU and case fans (exhaust vs. intake) determines effective airflow, with same-direction flow potentially working better.

NTE Global Official
Official server of NTE (Neverness to Everness), a supernatural urban open-world RPG developed by Hotta Studio.
84,665 Online
369,792 Members
💻┆technical-help
Summarized from recent messages. Can get things wrong.
- Screen tearing and bad frame pacing occur when the GPU produces frames at a different rate than the monitor's refresh rate, leading to a visually worse experience
- AMD FreeSync can help, but more precise control over frame pacing can be achieved with tools like RivaTuner Statistics Server (RTSS)
- Speculation includes a 6090 GPU possibly releasing in January or 2030, and the 5080S 24GB, with uncertainty about AIB partners releasing it.
- One player suggests an older GPU, the 9070XT, is now ancient, while another jokingly mentions a new 5050 GPU as an upgrade.
- A 4.4GHz all-core overclock at 75C and 1.32V is considered stable and performs well
- The 5800x3D CPU and RTX 3070 GPU are still considered relevant 5 years after their release
- The reported CPU power usage (TDP) for a 9600x is often around 65W, but can reach 75W or more under load, with potential peaks up to 230W.
- For a CPU reaching 90+°C at 84W power, better airflow or a new cooler is recommended to improve temperatures.
- A 9600x CPU shows unusually high voltage (1.3V) and SOC power, reaching levels typically seen only on dual CCD processors, despite being a single CCD chip.
- The high voltage is concerning for AM5 platforms, as even with poor binning, 1.3V is considered too risky, especially since the member didn't manually adjust PBO.
- The CPU's power consumption is low (75W) compared to its boosted capacity (105/130/140W), possibly indicating a cooling issue or misconfiguration.
- The CPU Core Power reporting only 43W suggests a potential issue with how AMD's reporting or an underlying problem.
- A 5800x3d typically runs hot by default, and 70-83°C at idle or stock settings is not necessarily normal, suggesting possible cooling issues.
- Check thermal paste, cooler seating, and case airflow as potential causes for high temperatures.
- Using RTSS framelock and Nvidia Reflex can make 1% and 0.1% lows match the average framerate, improving smoothness.
- To configure, open the RTSS taskbar icon, set the framerate limit (e.g., 120), disable Passive Waiting, turn on framerate lock, and choose Nvidia Reflex.
- An 85°C CPU temperature at low wattage (40W) on a 9600X is abnormal and indicates a cooling issue, as it should be in the mid 50s to low 60s
- The issue is likely with the cooler itself, thermal paste application, or even improper fan direction, rather than the CPU's design to run hot for boosting.
- The CPU drawing only 44 watts means the CPU itself is not the cause of high temperatures, ruling out undervolting as a solution
- Likely causes for high CPU temps include bad thermal paste application, a garbage CPU cooler, or incorrect fan curves
- Unscrew the 2-3 screws holding the fan and unplug it from the board; the fan is not merged with the heatsinks and can be easily detached.
- To unplug the fan cable, pull from both sides with equal force in a horizontal motion if it's tough to remove.
- Keep fans from spinning manually when blowing air into the PC to avoid damaging the motor.
- Use a brush or an old, dry toothbrush to dislodge debris from fans and other components.
- The ASC cable connecting Australia to Singapore was damaged over a month ago by a boat that didn't follow charts.
- Traffic is being rerouted, causing instability and higher ping until the cable is repaired, with an expected repair date of November 4th.
- The issue involves unstable connection messages, getting kicked to the loading screen, and high ping, particularly on the SEA server (194-200ms for US)
- The problem occurs even when connected via Ethernet and across different devices (PC via Ethernet, mobile via WiFi), but not with mobile data.
- Systematic testing involves using manufacturer-provided software for health checks on components like the GPU or NVMe drive, rather than immediately jumping to RMA or reinstalling Windows.
- Stress testing tools like OCCT or Prime95 are for testing stability under extreme conditions after changing settings, not for general hardware health checks.
- NTE is demanding on the GPU, but all GPUs can handle it to some extent
- One member's PC had issues with 32GB RAM not being enough for gaming, while another member is fine with 16GB RAM for general use
- Adding profile widgets on Discord is a feature exclusive to desktop or web versions, not available on mobile devices.
- Members can view existing widgets on profiles via their phone, but cannot add or modify them through the mobile app.
- Default core parking on older chipset drivers can cause games to access both CCDs, leading to performance issues due to high latency between the CCDs.
- When a game accesses both CCDs, it has to sync across both for each frame, and the latency between them negatively affects performance.
- A speed test shows 90 megabits per second download speed and 200ms latency, which is considered very poor for gaming or general internet use.
- The 90Mbps speed is actually 90 megabits, not megabytes, and while not extremely high, it's sufficient for many purposes; the primary issue is the high latency.

